IBM 60, User Manual

Page: 54 / 166

4. Scroll to AUTOLINK OUTPUT STACKERS, and press the Enter key. Enter the
key operator password, if prompted.
5. Scroll to YES, and press the Enter key to select autolinking. Scroll to NO, and
press the Enter key to deselect autolinking.
6. Press the Menu/Exit key to exit menu mode.
7. Empty both stackers before pressing Start to continue printing.
Note: When using autolinked stackers, be sure to completely empty both stackers
before starting or continuing a print job. If a print job is being continued, the pages
that are printed after autolinking has been selected will be sent to the first stacker
in the autolink order.
Clearing Autolinked Stackers
When the stackers are autolinked, stacker-specific STACKER FULL messages are
displayed as each stacker becomes full. However, the printer stops printing only
after both enabled stackers become full. When both stackers are full and the printer
stops printing, you can clear the autolinked stackers.
Note: Both stackers must be enabled (see “Enabling or Disabling a Stacker” on
page 4-10) and autolinked (see “Autolink Output Stackers” on page 4-11) in order
for the printer to indicate that both stackers are full.
To clear the autolinked stackers, do the following:
1. Completely empty both stackers. The STACKER FULL messages will clear.
2. Press the Start key to continue printing.
Note: To ensure job integrity, do not press the Start key until both stackers are
completely empty. Although the printer does not stack printed output in full
stackers, it stacks printed output in partially-full stackers.
Configuring the Printer
A key operator selects several choices regarding how the printer functions.
Establishing the setup that best suits a particular printing environment involves
configuring the printer.
Changes a key operator makes to some printer configuration items take effect only
after a printer restart. You are prompted to restart the printer after making such
changes. You can restart the printer immediately upon seeing the message or wait
until later to do so.
The following table describes items that a key operator can configure. To access
these items, select the SETUP main menu item followed by the PRINTER
CONFIGURATION submenu item.
4-12
InfoPrint 60 User's Guide