IBM 60, User Manual

Page: 47 / 166

6. Scroll to SIDE TRAY, and press the Enter key.
Notes:
1. If you change the form name designated to a tray that already has an
autoswitch tray selected and the form name is different, then the FORM
MISMATCH FOR AUTOSWITCH message appears. Press the Enter key to
clear this message. Change the form in the autoswitch tray to match the form
name designated in the original tray.
2. The autoswitch tray must have the same form name as the original tray. If you
choose an autoswitch tray loaded with a different form name, the WRONG
FORM IN AUTOSWITCH TRAY message appears. Change the form name for
that autoswitch tray to match the original tray, or choose a different autoswitch
tray.
3. If you choose an autoswitch tray that is disabled, the AUTOSWITCH TRAY
NOT ENABLED message appears. Enable the autoswitch tray or choose a
different autoswitch tray. If another one is not chosen, there is no autoswitch
tray.
4. If someone changes the form name designated to an autoswitch tray, that tray
no longer acts as an autoswitch tray.
5. If no autoswitch tray is selected, printing stops when the original tray is empty.
Tray Selection Defaults
If the key operator has not configured the trays, the following order of priority is the
default. All trays may not be present on your printer.
If the selected tray is not available because it is out of paper or was assigned the
incorrect form size, the printer stops printing and a message appears on the
operator panel display. See Table 7-1 on page 7-19 for a list of messages and
their meanings.
Priority Simplex/Duplex
1 Main tray
2 Side tray (option)
3 Upper sub tray
4 Lower sub tray
Print Services Facility (PSF) Tray/Stacker Names
The tray names used by the printer are descriptive to make it easier to identify their
location on the printer. However, the PSF program assigns numbers to trays and
stackers. When users send print jobs from their workstations to the printer, they
may be selecting input and output trays labeled with PSF numbers.
See the following table to determine the correspondence between the PSF
input/output bin numbers and the printer tray/stacker names. Remember that the
side tray and the 3 000-sheet side stacker are options.
Note: Select base stacker for all label printing.
Chapter 4. Customizing the Printer
4-5