IBM 60, User Manual

Page: 88 / 166

3. Press the Menu/Exit key to enter menu mode.
4. Scroll to the TRAYS/STACKERS menu, and press the Enter key.
5. Scroll to SIDE STACKER, and press the Enter key. Enter the key operator
password, if prompted.
6. Press the Enter key on ENABLE STATUS.
7. Scroll to DISABLE, and press the Enter key to disable the stacker.
8. Return to the TRAYS/STACKERS menu, and press the Enter key.
9. Scroll to AUTOLINK OUTPUT STACKERS, and press the Enter key. Enter the
key operator password, if prompted.
10. Scroll to NO, and press the Enter key to deselect autolinking.
11. Press the Menu/Exit key to exit menu mode.
Positioning Preprinted and Prepunched Paper
When loading preprinted or prepunched paper, position the paper correctly in the
tray and adjust printer settings for edge sensitivity and side sensitivity. See
“Defining Form Names” on page 4-26.
Edge sensitivity describes which edge of the paper you load in a tray as the leading
edge. Edge sensitivity rotates an image 180° for simplex jobs (all paper sizes) and
for duplex jobs (Legal, Ledger, A3, and B4).
Side sensitivity defines on which side of the paper to print (whether the paper faces
up or faces down when loaded in a tray). Selecting SIDE SENSITIVITY results in
simplex jobs traveling through the duplex paper path. This allows the intermixing of
simplex and duplex jobs to be run from the same input tray, such that the same
paper orientation is achieved in the output stacker.
Preprinted Paper (Prepunched or Nonpunched)
5-16
InfoPrint 60 User's Guide