IBM 60 User Manual Download Page 58 | Manualshive

Page: 58 / 166

background image

Running Internal Test Prints

Internal test prints consist of information that originates at the printer. The following
menu items are internal test prints:

PRINT HELP PAGE

PRINTER CONFIGURATION

PRINT SAMPLES

Enabling/Disabling an Attachment

An enabled attachment attempts to establish communication with the host. When
the current attachment is enabled, the printer is online. When the current
attachment is disabled, the printer is OFFLINE and cannot receive data from the
host.

Before running internal test prints the printer must be NOT READY and OFFLINE.
If the printer is READY or is running, press the Stop key to make the printer NOT
READY. The key operator must disable the attachment to take the printer
OFFLINE. The printer is OFFLINE (disabled) when the On Line indicator on the
operator panel

is not lit.

Note: To enable or disable an attachment, that attachment must be installed. See
“Installing an Attachment” on page 4-19.

To disable an attachment, do the following:

1. Press the Stop key (if the printer is READY) to stop any current print jobs and

to make the printer NOT READY.

2. Press the Menu/Exit key to enter menu mode.

3. Scroll to the ATTACHMENTS menu, and press the Enter key. Enter the key

operator password, if prompted.

4. Scroll to the attachment you are using (for example, TCP/IP Ethernet), and

press the Enter key.

5. Scroll to ENABLE STATUS, and press the Enter key.

6. Scroll to DISABLE to take the printer OFFLINE. Scroll to ENABLE to put the

printer online.

7. Press the Enter key to make your selection. The DISABLING... or ENABLING...

message appears on the display.

8. Press the Menu/Exit key to exit menu mode.

9. If you have completed running internal test prints, press the Start key to make

the printer READY and to continue printing.

Notes:

1. If the printer is READY and enabled and an attempt is made to run internal test

prints, the FUNCTION UNAVAIL STOP PRINTER message appears. The
printer must be NOT READY and disabled to run internal test prints.

2. If the printer is READY and disabled and an attempt is made to run internal test

prints, the FUNCTION UNAVAIL STOP PRINTER message appears. The
printer must be NOT READY and disabled to run internal test prints.

4-16

InfoPrint 60 User's Guide

«
...
56
57
58
59
60
...
»

Summary of Contents for 60







































































































































































Reviews:

No comments

Related manuals for 60

Brand: Olivetti Pages: 254

POWERMATE ES 5250 - S

Brand: NEC Pages: 18

POWERMATE VT 300 RELEASE NOTES

Brand: NEC Pages: 16

POWERMATE CT 815 - RELEASE NOTES

Brand: NEC Pages: 155

Brand: NEC Pages: 6

POWERMATE ES Series

Brand: NEC Pages: 132

POWERMATE ES Series

Brand: NEC Pages: 8

Brand: NEC Pages: 167

Brand: NEC Pages: 1

Brand: Jason.L Pages: 6

Brand: VISIONARY DESIGNS Pages: 2

Brand: Gateway Pages: 108

Brand: Advantech Pages: 38

Brand: Clarke Pages: 4

Brand: Acnodes Pages: 10

LCD Computer and Touchscreen

Brand: Tek Panel Pages: 2

Core 100 Series

Brand: ASROCK Pages: 4

Brand: ASROCK Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands