IBM 60 User Manual Download Page 126

Page: 126 / 166

6. Return the cleaner unit to its original position. Align the arrows on the cleaner

unit and the EP module. Latch the cleaner unit cover handle in place.

7. Push the EP module in using the EP module handle. Lock the EP module in

place by turning the paper feed module handle clockwise to the LOCK position
and turning the two lock levers counterclockwise.

8. Close the front cover.

9. Press the Start key to verify all jams have been cleared, to clear the operator

panel message, and to continue printing.

Clearing Paper from the Paper Feed Module Area

Use the following steps to clear paper from the paper feed module area (lights 7, 8,
9, 11, and 12 on the paper jam indicator).

1. Open the front cover.

2. Open the paper feed module by turning the paper feed module handle

counterclockwise to the RELEASE position, then pull forward.

7-8

InfoPrint 60 User's Guide

Summary of Contents for 60







































































































































































Search results

Summary of Contents for 60

Reviews:

Related manuals for 60

Brands by name

Popular brands

IBM 60, User Manual

Search results

Summary of Contents for 60

Reviews:

Related manuals for 60

Brands by name

Popular brands