IBM 60, User Manual

Page: 50 / 166

Adjusting the 1 500-Sheet Side Stacker
Refer to the figure below each instruction as you adjust the side stacker for the
appropriate paper size.
1. For B5, A4, and letter paper sizes, push in the stacker slide until it clicks into
place. For B4, A3, legal, and ledger paper sizes, pull out the stacker slide until
it clicks into place.
2. If necessary, adjust the side paper guide unit at the top left of the stacker so
that it matches the selected paper size. Raise the cover to more easily access
the side paper guide unit.
Note: If legal-size paper is used, a legal-size paper guide is available.
Request it through your customer engineer (CE).
3. Adjust the side paper guide unit by doing the following:
a. Loosen the large screw that is above the paper size indicator.
b. Loosen the large screw that is at the bottom of the side paper guide unit.
c. Move the side paper guide unit up slightly and remove it by positioning the
holes over the loosened screws.
d. Reposition the side paper guide unit on the other paper size indicator, and
slide it down to secure it.
4-8
InfoPrint 60 User's Guide