IBM 60, User Manual

Page: 52 / 166

c2pg0042
Stacker Exit
Guide
LG B5 A4,LT
Enabling or Disabling a Stacker
The key operator can enable or disable either stacker. If a stacker is enabled, the
printer can use it. If a stacker is disabled, the printer cannot use it.
Note: The side stacker must be disabled when printing labels.
You may want to disable a stacker if it is having problems (for example, frequent
paper jams caused by out-of-specification paper).
To enable or disable a stacker do the following:
1. Press the Stop key (if the printer is READY) to temporarily stop any current
print jobs and make the printer NOT READY.
2. Press the Menu/Exit key to enter menu mode.
3. Scroll to the TRAYS/STACKERS menu, and press the Enter key.
4. Scroll to the stacker you want to enable or disable, and press the Enter key.
Enter the key operator password, if prompted.
5. Press the Enter key on ENABLE STATUS.
6. Scroll to ENABLE, and press the Enter key to enable the stacker. Scroll to
DISABLE, and press the Enter key to disable the stacker.
7. Press the Menu/Exit key to exit menu mode.
Stacker Selection Defaults
If the print job does not instruct the printer which stacker to use, the following
priority applies.
Priority Stacker
1 Side stacker
2 Base stacker
4-10
InfoPrint 60 User's Guide