IBM 60 User Manual Download

Page: 44 / 166

Enabling or Disabling a Tray

The key operator can enable or disable any of the trays. If a tray is enabled, the
printer can use it. If a tray is disabled, it cannot be used.

You may want to disable a tray if it is having problems (for example, frequent paper
jams caused by out-of-specification paper).

To enable or disable a tray, do the following:

1. Press the Stop key (if the printer is READY) to temporarily stop any current

print jobs, and make the printer NOT READY.

2. Press the Menu/Exit key to enter menu mode.

3. Scroll to the TRAYS/STACKERS menu, and press the Enter key.

4. Scroll to the tray you wish to enable or disable, and press the Enter key to

make the selection.

5. Press the Enter key on ENABLE STATUS. Enter the key operator password, if

prompted.

6. Scroll to ENABLE, and press the Enter key to enable the tray. Scroll to

DISABLE, and press the Enter key to disable the tray.

4-2

InfoPrint 60 User's Guide

Summary of Contents for 60







































































































































































Search results

Summary of Contents for 60

Reviews:

Related manuals for 60

Brands by name

Popular brands

IBM 60, User Manual

Search results

Summary of Contents for 60

Reviews:

Related manuals for 60

Brands by name

Popular brands