manualshive.com logo in svg

IBM 4400 Series, User Manual, Page: 70 / 326

Share
Download
IBM 4400 Series User Manual Download Page 70

Chapter 3

System Configuration

70

 

System Configuration

SMART

The System Configuration form allows you to change the WLAN 
PrintNet Enterprise’s operation mode. Select “Reboot” to repower 
the print server. Select “Default” to reset the print server and have it 
come up with factory default settings.

Figure 21. System Configuration

The System Configuration form allows you to change the Ethernet 
Interface's operation mode. Select “Reboot” to re-power the print 
server. Select “Default” to reset the print server and have it come 
up with factory default settings.

Status

SMART

The Status menu items allow you to view the current status of both 
the printer and the network. The submenu items available are as 
follows:

•

I/O Port - this menu item allows you to view the current status 
of the printer, including the print jobs that are queued or are 
currently active.

•

Network - this menu item allows you to view the current status 
of the network connection.

Summary of Contents for 4400 Series







































































































































































































































































































































Reviews:

No comments