IBM 4400 Series, User Manual

Page: 154 / 326

Chapter 7
Novell Ethernet Interface Configuration (10/100Base-T)
154
Changing The Ethernet Interface Frame Type
(NDS and Bindery Setups)
The Ethernet Interface allows you to store a particular frame type
for the unit to adhere to in a Novell environment.
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://EthernetInterfaceIPaddress/
networkConf.html
(e.g.,
http://192.75.11.9/networkConf.html
).
NOTE: If prompted for a “User ID” and password first, type
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the “Novell” section and go to the “Frame Type”
field to select the appropriate frametype.
4. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.
Manual (Telnet) Method
1.
Telnet
to the print server. This will bring up a login screen:
telnet ipaddress
NOTE: If prompted for a “User ID” and password first, type
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the Ethernet Interface IP
address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell frametype [ethernet2 | 802.3
|802.2 |802.2snap | autosense]