manualshive.com logo in svg

IBM 4400 Series, User Manual, Page: 24 / 326

Share
Download
IBM 4400 Series User Manual Download Page 24

Chapter 1

Interfaces

24 

SMART

6.

Load a specific printer configuration before processing a print 
job

•

Specify a printer configuration to be associated with a print 
queue.

•

When a job is set to that print queue, the associated printer 
configuration will be loaded before the job is processed.

•

Feature allows you to define up to eight unique and 
independent printer personalities in a single printer.

•

Allows you to effectively have eight different printers in one.

Interfaces

The Ethernet interacts with your printer through an Ethernet™ 
10/100Base-T interface connector. 

10/100Base-T

The Ethernet Interface at the rear of the printer for the 10/100Base-
T interface has two indicator lights and two DIP switches, as shown 
in Figure 2. 

Figure 2. Status Indicator Lights and DIP Switches

1

2

STAT (System Status)

NET (Data to Network)

DIP Switches

Summary of Contents for 4400 Series







































































































































































































































































































































Reviews:

No comments