IBM 4400 Series User Manual Download

Page: 225 / 326

225

MVS Configuration for

an IPDS Printer

Overview

SMART

This chapter only applies to the Smart Ethernet Interface. Use this
chapter to configure MVS to print IPDS files on your IBM 4400
network printer.

To print IPDS files, you must have the IPDS option on the printer.

Requirements

Verify that you have the following minimum required software:

•

PSF/MVS Version 2.2.0 with APAR OW15599 (for TCP/IP
support)

•

MVS Scheduler with APAR OW12236 to support two new
PRINTDEV keywords: IPADDR and PORTNO

•

TCP/IP Version 3 Release 1, or higher, installed and configured
on MVS

To obtain the PTFs associated with these APARs, contact the IBM
Support Center.

Summary of Contents for 4400 Series







































































































































































































































































































































Search results

Summary of Contents for 4400 Series

Reviews:

Related manuals for 4400 Series

Brands by name

Popular brands

IBM 4400 Series, User Manual

Search results

Summary of Contents for 4400 Series

Reviews:

Related manuals for 4400 Series

Brands by name

Popular brands