IBM 4400 Series, User Manual

Page: 279 / 326

List Commands
279
set var from default
Set all variable settings back to factory defaults.
set var from stored
Set all current variable settings to the values stored in flash
memory.
List Commands
These commands list the current or working settings for a particular
section within the command shell. To view stored settings in flash
memory, insert
stored
after
list
. For example,
list prn
shows the current printer settings but
list stored prn
shows
the settings in flash memory. Normally these should match.
list arp
List the current ARP table that the Ethernet Interface adheres
to in a TCP/IP network.
list date
List the current date on the Ethernet Interface.
list dest
List the current destination settings (e.g., names and mapped
I/O ports, models, and logpaths).
list diff
List the differences between the current settings and the stored
settings in flash memory. Normally, you want these values to
match, so issue a
save command followed by a reset
command.
list ifc
List the current UTP interface settings (e.g., link integrity).
list key
List the license details and license key number.
list logins
List any active user logins on the Ethernet Interface.
list logpath
List the current logpath settings (e.g., names and mapped
destinations).