manualshive.com logo in svg

IBM 4400 Series, User Manual, Page: 134 / 326

Share
Download
IBM 4400 Series User Manual Download Page 134

Chapter 6

Novell Host Configuration

134 

24. Press ESCAPE until back at the PCONSOLE Main Menu.

25. Repower the printer.

26. Wait two minutes and then select “Print Queue Information” 

from the PCONSOLE Main Menu.

27. Select this new queue from the menu that displays.

28. Select “Currently Attached Servers” to see which print server is 

servicing this queue.

At this point, the Ethernet Interface name (e.g., M_071C1A) should 
show within this window. This means the Ethernet Interface knows 
about this new Novell print queue it must service as a PSERVER. 
Therefore, it will poll this queue regularly looking for jobs to print.

NOTE: In a NetWare environment the Ethernet Interface will 

service only one of the four available printer objects (such 
as d1prn); do not configure more than one printer object 
from the printer. The Ethernet Interface cannot service 
multiple file servers at one time; do not configure multiple 
file servers to access the printer.

NetWare Version 3.x RPRINTER Setup

These steps are for Novell environments with Netware 3.x (or 
earlier) file servers.

To configure a new RPRINTER on a NetWare 3.x network:

1.

Log in to the Ethernet Interface command shell, npsh, as 

root

.

If you have TCP/IP available and this print server already has 
an IP address stored within it, you can use the built-in HTML 
configuration forms or a Telnet session. Please see 
“Configuration Tools” on page 32 for further details. If you have 
only Novell available, you will need to use a PC, laptop, or 
terminal.

Summary of Contents for 4400 Series







































































































































































































































































































































Reviews:

No comments