IAI X-SEL PX, Operation Manual, Page: 465 / 560

437
Appendix
I/O Parameters
No. Parameter name
Default value
(Reference)
Input range Unit Remarks
126 Network attribute 7 7D007D0H 0H ~
FFFFFFFFH
Ethernet TCP/IP message communication attribute
Bits 0 to 15: Min timeout value (msec)
Bits 16 to 31: Mout timeout value (msec)
127 Network attribute 8 5050214H 0H ~
FFFFFFFFH
Ethernet TCP/IP message communication attribute
Bits 0 to 7: CONNECT_TIMEOUT
(Change is prohibited)
(Setting of “0” is prohibited) (sec)
Bits 8 to 15: Connection retry interval
(IAI protocol B/TCP) (sec)
Bits 16 to 23: Send timeout value (sec)
Bits 24 to 31: IAI protocol B-SIO non-communication
check timer setting (sec)
(IAI protocol B/TCP connection trigger)
128 Network attribute 9 10000H 0H ~
FFFFFFFFH
Ethernet TCP/IP message communication attribute
Bits 0 to 15: SEL server open timeout value (sec)
(No timeout check when “0” is set)
Bits 16 to 23: Connection retry interval
(Tracking vision system I/F) (sec)
129 Network attribute 10 0H 0H ~
FFFFFFFFH
Ethernet operation requirement
Bits 0 to 3: Modbus/TCP (Remote I/O)
(0: Not in use
1: Use (Disable exception status)
2: Use (Enable exception status (upper
two digits of error number)))
* Refer to the explanation of error
levels in the operation manual and
perform processing appropriate for
each error level.
Bits 4 to 7: TCP/IP message communication
(0: Not in use, 1: Use)
Bits 8 to 31: Reserved (Operation requirement)
130 Own MAC address (H) 0H Reference
only (HEX)
Only the lower two bytes are valid.
131 Own MAC address (L) 0H Reference
only (HEX)
132 Own IP address (H) 192 1 ~ 255 * Setting of “0” and “127” is prohibited.
133 Own IP address (MH) 168 0 ~ 255
134 Own IP address (ML) 0 0 ~ 255
135 Own IP address (L) 1 1 ~ 254 * Setting of “0” and “255” is prohibited.
136 Subnet mask (H) 255 0 ~ 255
137 Subnet mask (MH) 255 0 ~ 255
138 Subnet mask (ML) 255 0 ~ 255
139 Subnet mask (L) 0 0 ~ 255
140 Default gateway (H) 0 0 ~ 255
141 Default gateway (MH) 0 0 ~ 255
142 Default gateway (ML) 0 0 ~ 255
143 Default gateway (L) 0 0 ~ 255
438
Appendix
I/O Parameters
No. Parameter name
Default
value
(Reference)
Input range Unit Remarks
144 IAI protocol B/TCP: Own
port number (MANU mode)
64511 1025 ~ 65535
145 Channel 31 opened to user
(TCP/IP): Own port number
64512 1025 ~ 65535
146 Channel 32 opened to user
(TCP/IP): Own port number
64513 1025 ~ 65535
147 Channel 33 opened to user
(TCP/IP): Own port number
64514 1025 ~ 65535
148 Channel 34 opened to user
(TCP/IP): Own port number
64515 1025 ~ 65535
* Important note: Always set a unique number for each
own port number.
(Duplication of own port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
149 IAI protocol B/TCP: IP
address of connection
destination (MANU mode)
(H)
192 0 ~ 255 * Setting of “0” and “127” is prohibited.
150 IAI protocol B/TCP: IP
address of connection
destination (MANU mode)
(MH)
168 0 ~ 255
151 IAI protocol B/TCP: IP
address of connection
destination (MANU mode)
(ML)
0 0 ~ 255
152 IAI protocol B/TCP: IP
address of connection
destination (MANU mode)
(L)
100 0 ~ 254 * Setting of “0” and “255” is prohibited.
153 IAI protocol B/TCP: Port
number of connection
destination (MANU mode)
64611 0 ~ 65535 * “0” can be set in the case of a server.
0 = Port number of connection destination is ignored
(only the IP address is checked)
* “0” cannot be set in the case of a client.
154 IAI protocol B/TCP: IP
address of connection
destination (AUTO mode)
(H)
192 0 ~ 255 * Setting of “0” and “127” is prohibited.
155 IAI protocol B/TCP: IP
address of connection
destination (AUTO mode)
(MH)
168 0 ~ 255
156 IAI protocol B/TCP: IP
address of connection
destination (AUTO mode)
(ML)
0 0 ~ 255
157 IAI protocol B/TCP: IP
address of connection
destination (AUTO mode)
(L)
100 0 ~ 254 * Setting of “0” and “255” is prohibited.
158 IAI protocol B/TCP: Port
number of connection
destination (AUTO mode)
64611 0 ~ 65535
* “0” can be set in the case of a server.
0 = Port number of connection destination is ignored
(only the IP address is checked)
* “0” cannot be set in the case of a client.
159 IAI protocol B/TCP: Own
port number (AUTO mode)
64516 1025 ~ 65535 * Important note: Always set a unique number for each
own port number.
(Duplication of own port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
0
0
160 IP address of vision system
I/F connection destination
(H)
192 0 ~ 255 * Setting of “0” and “127” is prohibited.
160~
169
(For network extension) 0
170~
200
(For extension) 0
PC: PC software
TP: Teaching pendant
441