IAI X-SEL PX, Operation Manual, Page: 453 / 560

425
Appendix
 5
426
Appendix

List of Parameters
If you have any question regarding changing the parameters, please contact IAI’s Sales Engineering
Section. After changing a parameter, record the new and old parameter settings.
If you have purchased the PC software, we recommend that you back up the parameters immediately
after the controller is delivered and when the system incorporating the controller is started. Since a
number of customizing settings use parameters, you should back up the parameters regularly as you back
up the programs.
To make the new parameters effective, write them to the flash ROM and then execute a software reset or
reconnect the power.
The lists below are examples of default values displayed on the PC software. The default parameter
settings vary depending on the operating condition and actuators used.
The input range is based on the maximum and minimum limits of values that can be input using the
teaching pendant or PC software. In practice, enter the values defined in the Remarks field.
Note: Values other than those defined in the Remarks field, including values inside the applicable input
range, are reserved for future extension. Do not enter values other than those defined in the
Remarks field.
429