![background image](http://html.mh-extra.com/html/hyundai/n700e/n700e_instruction-manual_2196571095.webp)
N700E INSTRUCTION MANUAL
3-22
A34
DC Injection Braking Frequency Setpoint
Range: 0.50 ~ 10.00 Hz in 0.01 Hz
Program the VFD frequency out when DC injection braking function kicks in. If set A34 to
0.5Hz, when VFD frequency out reaches to 0.5 Hz, DC braking function is activated.
Related Parameters: A33~A37
A35
DC Injection Braking Delay Time
Range: 0.0 ~ 5.0 Sec in 0.1 Sec
Program the delay time when the DC braking function actually starts form when VFD out
is the frequency value in A34.
Related Parameters: A33~A37
A36
DC Injection Braking Force at Stop
Range: 0.0 ~ 100.0 % in 0.1 % Depending on the N700E Type
Program the level of DC injection braking force of rated electric power of N700E
Related Parameters: A33~A37
A37
DC Injection Braking Time at Stop
Range: 0.0 ~ 10.0 Sec in 0.1 Sec
Program the DC Injection Braking duration
Related Parameters: A33~A37
A34
A37
A35
Frequency
Motor Run
t
A36
AC Current
DC Current
FW (Run)
Motor Free Run
FW (Run)
b43
Frequency
Motor
FreeRun
t
b42
DC Current
AC Current
Motor Run
b42 ~ b46 ( Extended A33 ~ A37)
***Note: For independent DC injection braking function control at VFD start and at VFD stop,
additional
parameters are allocated at b42 ~ b46, listed here for continuity, repeated again in the
b Group
descriptions.
b42
VFD Start Delay Time after DC Injection Braking
Range: 0.0 ~ 60.0 Sec in 0.1 Sec
Program the VFD start delay time after braking time at start is done
Related Parameters: A33, b42~b46
b43
DC Injection Braking Time at Start
Range: 0.0 ~ 6000 Sec in 0.1 Sec
Program the DC Injection Braking duration before VFD start
Related Parameters: A33, b42~b46