manualshive.com logo in svg

HP StoreAll 8200, Installation Manual, Page: 157 / 252

Share
Download
HP StoreAll 8200 Installation Manual Download Page 157

2.

Install the UFM client software on the couplets and clients:

[root@ib~]# tar -xf ufm-client-utils-2.0.0-28.tgz
[root@ib ~]# cd ufm-client-utilst
[root@ib ufm-client-utils]# ./install.sh
Check dependencies ...  OK 
Checking VoltaireOFED ....... OK 
Checking version ... 1.4.2_2 
Check the distribution ... Red Hat 
Proceed  ufm-discover package 
/usr/src/redhat/SRPMS/ufm-discover-1.0.0-1.src.rpm
ucceed to building ufm-discover package
Preparing...                ########################################### [100%]
   1:ufm-discover           ########################################### [100%]
Proceed  ib-gvd package
/usr/src/redhat/SRPMS/ib-gvd-1.0.0-1.src.rpm
Succeed to building ib-gvd package
/usr/src/redhat/RPMS/x86_64/ib-gvd-1.0.0-1.x86_64.rpm
Preparing...                ########################################### [100%]
   1:ib-gvd                 ########################################### [100%]
Proceed  ufm-client-utils package
/usr/src/redhat/SRPMS/ufm-client-utils-1.0.0-2.src.rpm
Succeed to building ufm-client-utils package
/usr/src/redhat/RPMS/x86_64/ufm-client-utils-1.0.0-2.x86_64.rpm
Preparing...                ########################################### [100%]
   1:ufm-client-utils       ########################################### [100%]
Service ufmdiscoverd installed succesfully.
Service ib-gvd installed succesfully.
DHCP client installed succesfully.
Start ufmagentd.
UFM discover proc  started
UFM gvd proc  started

3.

Install the Voltaire UFM server software on the UFM server. This is a management server that
is required to manage the Voltaire InfiniBand switch. This UFM server is attached to the Voltaire
InfiniBand switch through the Ethernet. See Voltaire documentation for installation procedures.

4.

The Voltaire UFM GUI automatically adds each server to a full partition. This setup can be
changed by creating environments, local networks, logical server groups, and logical servers
in the UFM GUI to create limited and full partitions.

Setting up InfiniBand couplets

157

Summary of Contents for StoreAll 8200





























































































































































































































































Reviews:

No comments