Hardware problems 45
•
If the drive fault LED is flashing, replace the hard drive. See the server maintenance and service guide.
•
If the drive fault LED is not flashing and the operating system supports HP Insight Diagnostics, version
7.40 or later ("
HP Insight Diagnostics
" on page
76
), perform the following:
a.
Run the Smart Array SCSI Diagnosis feature (on page
76
).
b.
Perform the actions recommended by the diagnosis report.
c.
If the issue is still present, run the appropriate array diagnostic software (on page
77
).
For array diagnostic software report analysis, contact HP support ("
Contacting HP
" on page
177
).
•
If the drive fault LED is not flashing and the operating system does not support HP Insight Diagnostics,
version 7.40 or later ("
HP Insight Diagnostics
" on page
76
), insert the SmartStart CD and run the
appropriate array diagnostic software (on page
77
). For array diagnostic software report analysis,
contact HP support ("
Contacting HP
" on page
177
).
System completes POST but drive fails
Action
:
1.
Be sure no loose connections (on page
19
) exist.
2.
Be sure no device conflict exists.
3.
Be sure the hard drive is cabled properly and terminated if necessary.
4.
Be sure the hard drive data cable is working by replacing it with a known functional cable.
5.
Be sure the access panel is installed properly when the server is operating. Drives may overheat and
cause sluggish response or drive failure.
6.
Run Insight Diagnostics ("
HP Insight Diagnostics
" on page
76
) and replace failed components as
indicated.
7.
Run RBSU ("
HP ROM-Based Setup Utility
" on page
68
) to verify that the boot controller order is set
properly.
No hard drives are recognized
Action
:
1.
Be sure no power problems (on page
38
) exist.
2.
Check for loose connections (on page
19
).
3.
Be sure that the controller supports the hard drives being installed.
4.
Be sure the controller has the most recent firmware.
Hard drive is not recognized by the server
Action
:
1.
Check the hard drive LEDs to be sure they indicate normal function. For information on hard drive LEDs,
see hard drive LED combinations (on page
21
). For server-specific hard drive LED information, see the
server documentation or the HP website (
http://www.hp.com
).
