Error messages 103
Other Controller Indicates Different Hardware Model
Description
: The other controller in the redundant controller configuration is a different hardware model.
Action
: Be sure both controllers are using the same hardware model. If they are, make sure the controllers are
fully seated in their slots.
Other Controller Indicates Different Firmware Version
Description
: The other controller in the redundant controller configuration is using a different firmware
version.
Action
: Be sure both controllers are using the same firmware revision.
Other Controller Indicates Different Cache Size
Description
: The other controller in the redundant controller configuration has a different size array
accelerator.
Action
: Be sure both controllers are using the same capacity array accelerator.
Processor Reduced Power Mode Enabled in RBSU
Description
: Processors clocked down
Action:
If you select the reduced power mode in RBSU, the processor are displayed as their reduced speed
during POST. This message indicates that the RBSU reduced power mode has been enabled and also
indicates the maximum speed for the installed processors.
Processor Not Started (Processor Stalled)
Description
: If processor fails to launch or fails after being launched but before completing its initialization,
the processor is not started and this message is displayed. This is likely a defective processor.
Processor Not Started (Stepping Does Not Match)
Description
: If a processor has a stepping different than the bootstrap processor, the processor is not started,
and this message is displayed.
Processor Not Started (Unsupported Processor Stepping)
Description
: If a processor has an unsupported stepping, it is not started, and this message is displayed.
Processor Not Supported (Unsupported Core Speed)
Description
: If a processor has a core speed that is incompatible with the other installed processors, the
processor is not started, and this message is displayed.