HP Brocade BladeSystem 4/12 User Manual Download Page 60

Page: 60 / 662

DCFM Professional User Manual

53-1001773-01

Management server and client

5. Go to the location of the first artifact (as shown in the src value under the file tag).

6. Copy the artifact from the extracted folder to the source folder in the

Install_Home

/patch-backup directory.

7. Repeat step 5 and 6 for all artifacts listed in the restore.xml folder.

8. Go to the

Install_Home

/conf directory.

9. Open the version.properties file in a text editor.

10. Change the patch version (patch.version) value to the reverted patch (for example, if you are

reverting from patch F to patch C then

patch.version = c

If the previous version is the initial version (no patches), change the patch version value to
none (for example,

patch.version = None

11. Go to the

Install_Home

/patch-backup/conf directory.

12. Copy the patch.conf file in this directory to the

Install_Home

/conf directory.

If the previous version is the initial version (no patches), delete the patch.conf file in the

Install_Home

/conf directory.

13. Start all services by completing the following steps.

a. Launch the Server Console.

b. Click the Services tab.

c. Click Start to start all services.

Summary of Contents for Brocade BladeSystem 4/12























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands

HP Brocade BladeSystem 4/12, User Manual

Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands