HP Brocade BladeSystem 4/12, User Manual

Page: 167 / 662

DCFM Professional User Manual 135
53-1001773-01
Device properties
7
Adding a property label
You can add a new field to any of the tabs on the Properties dialog box.
To add a new field, complete the following steps.
1. Right-click any product icon and select Properties.
The Properties dialog box displays.
2. Select the tab to which you want to add a property.
3. Right-click on any label.
The new property label displays above the one you select.
4. Select Add.
The Add Property dialog box displays.
5. Type a label and description for the property.
6. Select the property type from the Type list, if available.
Slot # The slot number of the trunk.
Source IP Address The IP address of the of the FCIP tunnel source device.
Speed (Gb/s) The speed of the port in gigabytes per second.
State The device’s state, for example, online or offline.
Status The operational status.
Switch Name The switch name.
Switch IP The switch IP address.
Switch WWN The switch world wide name.
Tape Pipelining Whether tape pipelining is On or Off for the FCIP tunnel.
Tunnel ID The tunnel identifier.
Type The device type.
Unit Type The unit type of the node.
Vendor The product vendor.
# Virtual FCoE port count The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
VLAN # The VLAN number of the FCIP tunnel.
VLAN Class of Service for Control
Connection The VLAN class of service for the control connection of the FCIP tunnel.
VLAN Class of Service for Data
Connection The VLAN class of service for the data connection of the FCIP tunnel.
VLAN ID The VLAN identification number.
WWN The world wide name of the device.
TABLE 6 Device properties
Field/Component Description