HP Brocade BladeSystem 4/12, User Manual

Page: 486 / 662

454 DCFM Professional User Manual
53-1001773-01
Zoning configuration
15
6. Press Enter.
Depending on the characters included in the name you enter, a message may display
informing you the name contains characters that are not accepted by some switch vendors,
and asking whether you want to proceed. Click Yes to continue, or No to cancel the zone
creation.
7. Add zones to the zone configuration.
For step-by-step instructions, refer to “Adding zones to a zone configuration” on page 454.
8. Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.
Viewing zone configuration properties
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Potential Members list.
This identifies the target entity for all subsequent zoning actions and displays the zoning library
for the selected entity.
4. Right-click the zone configuration you want to review in the Zone Configs list and select
Properties.
The Zone Config Properties dialog box displays.
5. Review the zone configuration properties.
The following information is included in the zone properties:
•
Zone Config Name—The name of the selected zone configuration.
•
Number of Zones—The number of zones in the selected zone configuration.
•
Total Zone Members—The total number of zone members in the selected zone
configuration.
•
Unique Zone Members—The total number of zone members that are unique in the zone
configuration.
•
Status—The status of the selected zone configuration (active or not active).
6. Click OK to close the Zone Config Properties dialog box.
Adding zones to a zone configuration
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.