HP Brocade BladeSystem 4/12, User Manual

Page: 562 / 662

530 DCFM Professional User Manual
53-1001773-01
About User Privileges
C
Zoning Online
NOTE
You must also have the
Zoning Activation privilege
to enable the Activate
button.
NOTE
You must also have the
Zoning g Offline privilege
to enable the Save As
function in the in the
Zoning and
Compare/Merge dialog
boxes.
Allows you to edit any of
the fabric zone databases
in the available fabrics
within the Zoning dialog
box from the client side
and then save to the
switch. In Zoning dialog box, the
Zone DB list includes
online and offline zones;
however, if an online zone
is selected, the contents
are not loaded into the
Zoning dialog box. To
launch offline zones you
must have the Zoning
Offline privilege.
Disables all zone
database editing and
switch pushing functions. In Zoning dialog box, the
Zone DB list includes
online and offline zones.
If you select an online
zone, the contents are
loaded into the Zoning
dialog box. To launch
offline zones you must
have the Zoning Offline
privilege.
Disables all online zone
database editing,
activation, and persisting
functions.
In Zoning dialog box,
enables the Cancel and
Help buttons and the
Compare and Export
functions in the Zone DB
Operation list.
On the Zone DB tab,
enables the find buttons.
On the Active Zone Config
tab, enables the Zone
Member Display list and
Report button.
In the Compare/Merge
dialog box, enables the
Cancel and Help buttons.
In the Potential Members
table, enables all
functions in the right-click
menu.
In the Zones table,
enables the Port Label,
Search, and Properties
(not editable) functions in
the right-click menu.
In the Zone Configs table,
enables the Properties
(not editable) function in
the right-click menu. Enables all functions on
the Zoning dialog box.
Zone Set Edit Limits Allows you to set the
number of zoning edit
operations that can be
performed on a fabric
zone database before
activating a zone
configuration. Disables the Zoning > Set
Edit Limits command
from the Configure menu. Enables the Zoning > Set
Edit Limits command
from the Configure menu.
Disables all commands
and functions on the
dialog box except the
Close and Help. Enables the Zoning > Set
Edit Limits command
from the Configure menu.
Enables all commands
and functions on the
dialog box.
TABLE 30 Privileges and Application Behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write