HP Brocade BladeSystem 4/12, User Manual

Page: 347 / 662

DCFM Professional User Manual 315
53-1001773-01
QoS configuration
13
Assigning a traffic class map to a port or link aggregation group
You can assign a Traffic Class map to a port or ports under the LAG; however, a port does not
require a Traffic Class map be assigned to it. A port can have either a CEE map or a Traffic Class
map assigned to it, but it cannot have both.
NOTE
You cannot configure QoS or LLDP-DCBX on a LAG.
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a port or LAG, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
The QoS dialog box displays.
FIGURE 115
QoS, assign a traffic class map to a port dialog box
4. Click the Assign a map to <port name> check box.
5. Select Traffic Class in the Map Type list.
6. Select a Traffic Class Map in the Traffic Class Map list.
7. Click OK to commit the map assignment.
The CEE Confirmation and Status dialog box displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.