HP Brocade BladeSystem 4/12, User Manual

Page: 510 / 662

478 DCFM Professional User Manual
53-1001773-01
Zoning administration
15
When you select Replace, the Replace Zone Member dialog box displays. When you select
Replace All, the same dialog box displays, but with the title Replace Zone Member (all
instances).
5. Select the option from the Type list that you want to use to identify the replacement zone
member.
6. Enter the WWN, name, domain and port index numbers, or alias—whichever is appropriate for
the method you chose in step 4.
When you choose the WWN method, the Assign Name field is available; you may define a
name for the replacement zone member. If a name was previously assigned to the potential
member, a message displays informing you of this and asking whether you want to overwrite
the existing name. Click Yes to continue and assign a new name, or No to decline and dismiss
the message box.
7. Click OK.
If you have entered more than one port name or zoning method, a message displays informing
you of the error. Click OK to close the message, correct your entry, and click OK again.
If no entry error was made, the new zone member replaces the old zone member in the Zones
list and the Replace Zone Member dialog box closes.
8. Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.