HP Brocade BladeSystem 4/12 User Manual Download Page 107

Page: 107 / 662

DCFM Professional User Manual

53-1001773-01

Names

Setting names to be non-unique

You can choose to allow duplicate names in your fabric.

To set names to be non-unique, complete the following steps.

1. Select Server > Options.

The Options dialog box displays.

2. Select Names in the Category list.

3. Select Set names to be non-unique to allow duplicate names on your system.

4. Click OK on the Options dialog box.

Fixing duplicate names

To fix duplicated names, complete the following steps.

1. Select Configure > Names.

The Configure Names dialog box displays (

Figure 35

FIGURE 35

Configure Names dialog box

2. Click Fix Duplicates.

The Duplicated Names dialog box displays.

3. Select one of the following options.

•

If you select Append Incremental numbers for all repetitive names, the names are edited
automatically using incremental numbering.

•

If you select I will fix them myself, edit the name in the Name field.

4. Click OK on the Duplicated Names dialog box.

Summary of Contents for Brocade BladeSystem 4/12























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands

HP Brocade BladeSystem 4/12, User Manual

Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands