HP Brocade BladeSystem 4/12, User Manual

Page: 127 / 662

DCFM Professional User Manual 95
53-1001773-01
Software Configuration
3
Configuring asset polling
Asset polling allows you set the length of time between state change polling. To maximize the
efficiency of the polling feature (balance the amount of possible information with any possible
performance impact), base your settings on the size of the SAN.
To configure asset polling, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
client.
3. Enter how often (default is 60 seconds) you want to check for state changes in the Check for
state change every field.
You cannot enter a value lower than the default minimum value.
4. Enter how often (default is 120 seconds) you want to check for state changes in the If no state
change, Poll switch every field.
5. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after an application restart.
6. Click OK on the “changes take effect after application restart” message.