HP 8711C, User Manual, Page: 9 / 530

To Reduce the Receiver Noise Floor . . . . . . . . .
Reducing Trace Noise . . . . . . . . . . . .
To Activate Averaging for Reducing Trace Noise . . .
To Change System Bandwidth for Reducing Trace Noise
To Eliminate Receiver Spurious Responses . . . . . .
Reducing Mismatch Errors . . . . . . . . . . . . . .
Reducing Mismatch Errors in a Reflection Measurement
Reducing Mismatch Errors in a Transmission
Measurement . . . . . . . . . . . . . . . . .
Reducing Mismatch Errors When Measuring Both
Reflection and Transmission . . . . . . . . . . .
Measuring Devices with Long Electrical Delay . . . . .
6. Calibrating for Increased Measurement Accuracy
Measurement Calibration Overview . . . . . . . . . .
The Calibration Reference Plane . . . . . . . . . .
Determine if a Calibration is Necessary . . . . . . . . .
When a Calibration Not Necessary . . . . . . . . .
When a Calibration Necessary . . . . . . . . . . .
Choose an Appropriate Calibration Method . . . . . . .
To Perform a Normalization Calibration
. . . . . . .
To Perform a Transmission Calibration . . . . . . . .
To Perform a Reflection Calibration
. . . . . . . . .
To Perform a Conversion Loss Calibration . . . . . .
To Perform an AM Delay Calibration (Option or
only) . . . . . . . . . . . . . . . . . . .
To Perform a Calibration With Non-Standard
Connectors . . . . . . . . . . . . . . . . . .
Writing or Editing Your Own Cal Kit File . . . . . .
Save the Calibration . . . . . . . . . . . . . . . . .
Check the Calibration
. . . . . . . . . . . . . . . .
Using Calibration Check for Analysis and
Troubleshooting . . . . . . . . . . . . . . . .
To Perform a Calibration Check . . . . . . . . . . .
Error Term Descriptions and Typical Values
. . . . .
5-11
5-13
5-13
5-14
5-14
5-17
5-17
5-18
5-18
5-19
6-3
6-5
6-7
6-7
6-7
6-8
6-10
6-11
6-13
6-15
6-16
6-17
6 - 1 9
6-25
6-26
6-26
6-27
6-28
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com