HP 8711C, User Manual, Page: 323 / 530

Automating Measurements
Displaying Measurement Results
X-axis annotation consists of one or two lines of information that appear
below the graticule.
By default, the X-axis annotation displays the stimulus frequencies (default
resolution is or powers if in power sweep. It can be, however,
customized using SCPI commands to show your own start and stop x-axis
values and units. For example, when measuring mixers which introduce a
frequency offset, you can annotate the frequencies at the output of the mixer.
l
turn on user-defined X-axis annotation, use the command:
For example:
ON
l
To specify your start and stop values, use:
The value must be between -10,000 and 10,000. For example:
-100
lb specify a custom suffix, use:
<STRING>
for example:
The suffix can be up to 3 characters long.
l
lb turn the X-axis (frequency) annotation on or off, press
Options
ON
off , or use
these SCPI commands:
ON
7-66
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com