HP 8711C, User Manual, Page: 438 / 530

I
Reference
S
in marker math menu. Measures a user-defined segment of a
measurement trace and calculates the frequency span, mean, and standard
deviation of the amplitude response, and the peak-to-peak ripple.
See “To Use Marker Math Functions” in Chapter 4 for more information.
Access Keys:
(Option
in menu. When a program is
ready to run, this steps through the program one line at a time. Good
de-bugging tool.
See
the
HP Instrument BASIC User’s Handbook
for more information.
Access Keys:
[
SYSTEM OPTIONS
)
in menu. Sets the stop frequency of source. Maximum
frequency is 1.3 for HP and 3.0 for HP
in menu. Sets stopping point (in for a power sweep
measurement. in menu must be selected before
setting the start and stop power points.
See entry in this chapter for more information on the power
sweep function.
in update correction constants menu. Writes a copy of CC data from
To Disk
internal volatile RAM to a disk in the analyzer’s built in 3.5” disk drive. This
function is used to make a backup copy of CC data.
See the Service Guide for more information.
Access Keys:
[
SYSTEM OPTIONS
)
Update
in update correction constants menu. Writes a copy of CC data from
To
EPROM
internal volatile RAM to EPROM. This function is used so that current CC
data is not lost when power to the analyzer is turned off.
See the Service Guide for more information.
Access Keys:
[
SYSTEM OPTIONS
)
Update
9 - 7 5
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com