HP 8711C, User Manual, Page: 283 / 530

I
Automating Measurements
Operator Interaction
58 Message: !
59 key is programmable."
60 modify, select"
61 Options], [Edit]."
62 OUTPUT
MEDIUM"
63 RETURN
64 !
65 END
N O T E
For more programs,
see
the
Programs Disk
and the
HP Instrument
User’s Handbook
supplement. The disk and handbook are shipped with analyzers with the
O p t i o n
loading a
BEGIN
Program
A BEGIN program can be automatically loaded at power up if the
program is named “AUTOST” . An “AUTOST” program is loaded at power up
from the internal non-volatile memory or from a 3.5” floppy disk inserted into
the analyzer’s 3.5” disk drive. When the
key is pressed, the
program will remain idle until it is needed. The program remains idle until a
is pressed and code related to that is executed. After the code
is executed, the program returns to idle. Refer to example programs provided
on the
programs disk for example programs. Use of the
does
not
restrict access to any normally available front panel
feature, nor does this key affect sweep update rates.
7-26
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com