HP 8711C, User Manual, Page: 400 / 530

I
Reference
I
in update correction constants menu. Loads a permanent copy of
From
Disk
data from a floppy disk to internal EPROM. This must be done after loading
new
into the analyzer.
See the Service Guide for more information.
Access Keys:
(
SYSTEM OPTIONS
)
in service menu. Displays information about the network analyzer:
revision and date, version, serial number, options, system
impedance, and amount of memory.
Access Keys:
OPTIONS
)
Service
in the custom colors menu. This key only affects the analyzer’s
internal display. This key changes the brightness of the selected display item.
accepted are 0 to lOO%, with 0 resulting in black (not visible) and 100
resulting in full brightness.
in trigger source menu. Default mode, network analyzer is triggered
automatically (in mode) or as desired (in mode).
Access Keys: Trigger Source
in select disk menu. Selects the analyzer’s built-in disk drive as the
3.5”
location where information is saved, re-saved, or recalled.
See “Saving and Recalling Measurement Results” in Chapter 4 for more
information.
Access Keys:
[
SAVE
Select Disk
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com