HP 8711C, User Manual, Page: 284 / 530

Automating Measurements
Operator Interaction
Modifying a
Program.
You can modify the program with the built-in editor, an ASCII
file editor on a computer, or with keystroke recording. For example, to modify
the default program to recall a setup:
Select
[
SYSTEM OPTIONS
)
. Move the edit cursor to line:
15
OUTPUT
2. Use an external keyboard to replace with Setup .
3. Move the edit cursor to line 28. Delete the line.
4. Use keystroke recording to create a setup function if you like, or you can
now insert code you have written.
To use keystroke recording to modify the program:
Exit the editor by selecting .
Enable keystroke recording with Record ON
7. Now perform the keystrokes required for setup 1.
When the setup is completed, select
[
SYSTEM OPTIONS
)
Key OFF.
verify your change, select ON .
10. Select 1 which should be “Setup 1”. This should return
you to your correct setup.
11. You may save this program as an AUTOST or other for later recall.
Refer to the manual supplement, Using HP
with the
HP 8711
provided
in
the
HP Instrument BASIC User’s
Handbook,
for more information about editing, saving and recalling program
7-27
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com