HP 8711C, User Manual, Page: 375 / 530

I
Reference
C
(CAL)
Cal Cheek
Kit
Cal
on OFF
(Option 100 S
oftkey in menu. Used to perform fault location
and SRL measurements.
See your Option 100 User’s Guide Supplement
for
information.
in the CONFIGURE area. Displays the calibration menu options for
the current measurement mode.
See Chapter 6 for information on calibrating the analyzer.
in menu. Provides access to the check menu. The cal
check feature will compute and display corrected measurement uncertainties
(residual errors) that apply to the current instrument settings and
calibrations. This information may be used as an analysis or troubleshooting
tool when making transmission and reflection measurements.
See Chapter 6 for more information on using cal check.
in (CAL) menu. Allows selection of type of kit: Type-N female
(default), Type-N male, 3.5 mm (for use with 50 systems), Type-F female
(for use with 75 systems), or user-dehned.
By convention, cal kits indicate the sex of the with which they are used.
For example the default cal kit for the analyzer is type-N because the
front panel RF ports are female (the calibration standards, in turn, are male).
This same convention applies to whatever test “port” the standard is attached
to, be it an adapter, cable, fixture, etc.
See Chapter 6 for more information on calibrating the analyzer.
in define save menu. to ON if you want to save the active
measurement calibration along with the current instrument state.
See “Saving and Recalling Measurement Results” in Chapter 4 for information
on saving instrument states and measurement results to
Access Keys:
[
SAVE
9-12
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com