HP 8711C, User Manual, Page: 475 / 530

I
Much of the required safety information is distributed throughout this manual
in appropriate places. This section contains all required safety information
that is not included elsewhere in this manual.
Warning Definition
Warning denotes a hazard. It calls attention to a procedure which, if not
correctly performed or adhered to, could result in injury or loss of life. Do
not proceed beyond a warning note until the indicated conditions are
fully understood and met.
Warnings applicable to this instrument are:
W A R N I N G
No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
W A R N I N G
If this product is not used as specified, the protection provided by the
equipment could be impaired. This instrument must be used in a normal
condition (in which all means for protection are intact) only.
W A R N I N G
For continued protection against fire hazard replace line fuse only with
same type and rating (T 5
V). The use of other fuses or material is
prohibited.
W A R N I N G
This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth contact. Any
interruption of
the
protective conductor, inside or outside the instrument,
is likely to make the instrument dangerous. Intentional interruption is
prohibited.
11-3
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com