HP 8711C, User Manual, Page: 172 / 530

I
I
Using Instrument Functions
Saving and Recalling Measurement Results
To Delete a File
To Copy a File
1.
2.
3.
1.
2.
3.
Highlight the to be deleted by using the front panel knob or the
keys.
Press File YES
‘lb delete all within the current directory, press
YES.
Highlight the to be copied by using the front panel knob or the
keys.
Press File and then select the destination disk for the file to be
copied. You will then be given the opportunity to edit the destination
name if you wish.
Use a keyboard (if connected) or the front panel knob and the to
enter the destination filename.
C A U T I O N
There will be no warning from the analyzer if the destination already
exists. It will be overwritten without warning. For instance, STA
on the internal memory disk and . STA on a floppy disk in the
built-in disk drive may contain completely different sets of data. If you copy
one of those files to the other without editing the name, the will be
overwritten with the source file.
4.
To copy the file press Enter .
lb copy all the in the current directory, press All Files and
then select the destination disk for the files to be copied.
6. You will then be prompted to tell the analyzer where on the destination
disk to put the to be copied.
Press if you want the to go into the main, or root, directory of
the destination disk. Use a keyboard (if connected) or the front panel knob
and the
to enter a subdirectory on the destination disk before
pressing Enter .
4-70
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com