HP 8711C, User Manual, Page: 403 / 530

I
Reference
L
(Option
in [
SYSTEM OPTIONS
]
menu.
Pressing this key calls up the menu to setup your LAN port and to turn the
LAN state on or off. Refer to the
Option User’s Supplement
for
information.
(Option
only) in select copy port menu. Sets
the recognized IP address of a LAN printer. Refer to the
Option User’s
Guide Supplement
for information.
Access Keys:
[
HARD COPY
]
Port
in define printer menu. Sets printer to print hardcopy so that paper
is oriented with longer edge at top and shorter edges at sides. Toggles with
Portrait .
Access Keys:
(
HARD
in more printer menu. Sets left margin (non-printing space) in mm
M a r g i n
1 inches). Minimum setting is 0.00 mm (default); maximum
Access Keys:
[
HARD COPY
]
Printer
in menu. Sets the RF power level of the analyzer’s source.
See Chapter 10, “Specifications and Characteristics,” for the minimum and
maximum power levels for your analyzer.
in add max point or add min point menus. Sets the amplitude of a
limit point.
See “‘R
I
Create a Single Point Limit” in Chapter 4 for an example of how to
set a limit point.
Access Keys:
Limit Add limit Add Point
Add
9-40
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com