manualshive.com logo in svg

HP 8711C, User Manual, Page: 152 / 530

Share
Download
HP 8711C User Manual Download Page 152

I

 

 

The analyzer’s display can be customized in several ways:

l 

You can choose to view one or both measurement channels using the split

display feature.

l 

You can turn on or off features such as the display graticule and limit lines.

 You can also modify and/or turn on or off most of the display annotation.

l 

You can expand the measurement display to the full screen size and
eliminate all annotation except marker annotation.

Refer to “Displaying Measurement Results” in Chapter 7 for more information
on customizing the display.

4-50

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Summary of Contents for 8711C



















































































































































































































































































































































































































































































































































Reviews:

No comments