HP 8711C, User Manual, Page: 169 / 530

I
Using Instrument Functions
Saving and Recalling Measurement Results
To Save Measurement
Your measurement data can be saved in an format that is compatible
Data in ASCII Format
with many personal computer software packages.
lb save the measurement trace as an
1. Press
RECALL
]
Select Disk and select the that corresponds
to where you want to save your file. (See “Select the Disk,” earlier in this
section
Press Prior Menu Save ASCII .
Choose 123 Format or
l
Lotus 123 format is a two-column format that is compatible with
many personal computer software packages. Column 1 is the
frequency point, and column 2 is the measured value at that point.
l
Touchstone format is useful for importing measurement data into
CAE programs such as Hewlett-Packard’s Microwave Design System
(MDS). Touchstone format provides for analyzers with either 50
or 75 impedance. Since your analyzer cannot make full two-port
measurements, saving in Touchstone format is generally only useful
when measuring reflection
Choose
Save
1 or 2 , depending on which
measurement channel data you want to save.
3. The appears on the network analyzer screen as
for Lotus files-or . Touchstone is a
number the analyzer selects from 0 to 999.
N O T E
r
Your analyzer can store files only on disk that are formatted in MS-DOS.
4-67
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com