HP 8711C, User Manual, Page: 439 / 530

I
Reference
Sweep Out
Sweep Time
Switching
Set
SWR
sync
OFF
in SOURCE area of front panel. Displays menu to select automatic
sweep time (fastest possible), manual sweep, alternate sweep, or power
sweep.
in user TTL menu. Sets the USER TTL IN/OUT port on the
rear panel to be pulled high during a sweep.
Access
Keys:
[
SYSTEM OPTIONS
)
User
in [SWEEP] menu. Sets the sweep time from fastest possible to three
days (259.2 ks); overrides auto sweep time. Fastest possible sweeptime
varies, and depends on other analyzer settings.
See Chapter 5, “Optimizing Measurements” for more information on sweep
time.
in menu. Sets the network analyzer to sweep as fast as
possible (automatic) or at the sweep time of your choice (manual).
See Chapter 5, “Optimizing Measurements” for more information on sweep
time.
in the system menu. For use with a muliport test set.
Refer to the multiport test set User’s and service
Guide
for more information.
Access Keys:
[
SYSTEM OPTIONS
)
System
in [FORMAT) menu. Displays the data formatted as SWR (standing
wave ratio).
in CRT adjust menu. Default is OFF. For use with a sync-on-green
external monitor.
Access Keys:
(
SYSTEM
CRT Adjust
9 - 7 6
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com