HP 8711C, User Manual, Page: 301 / 530

I I
The production of RF components often involves several steps, each step
requiring a unique set of instrument settings. Likewise, the different test
configurations at each step may require associated calibrations. Requiring
the operator to manually enter these sets of parameters (or “states”) or to
calibrate at each step in the manufacturing process is slow, prone to error,
and costly.
An automated measurement system can be used to achieve fast and
consistent transitions between measurement setups. In an automated system,
the instrument parameters are set under program control. The control
program can be an
program running inside the analyzer, or be in
another language running on an external computer. The control program
sends SCPI and
commands to the analyzer’s HP-IB or LAN interface.
The commands rapidly change the instrument settings or calibration.
CONTROLLING PROGRAM F U L L I N S T R U M E N T S T A T E
S i n g l e P a r a m e t e r
F i l e T r a n s f e r
L e a r n S t r i n g C o n m a n d s
I
C O M P U T E R D I S K
D i s k o r E x t e r n a l F l o p p y )
I n s t r u m e n t S t a t e F i l e
I
Data
A N A L Y Z E R D I S K
( R
A M
1
S A V E / R E C A L L
I n s t r u m e n t S t a t e F i l e
I
Figure 7-8. Measurement Control
7-44
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com