To Set the Baud Rate
You can select one of six baud rates for
RS-232
operation. The rate is set
to 9600 baud when the multimeter is shipped from the factory.
See also
“Baud Rate Selection,” on page 93.
1 Turn on the front-panel menu.
A: MEAS MENU
2 Move across to the
I/O MENU
choice on this level.
E: I/O MENU
3 Move down a level and then across to the
BAUD RATE
command.
3: BAUD RATE
4 Move down to the “parameter” level to select the baud rate.
Use the left/right arrow keys to see the baud rate choices. Choose from
one of the following: 300, 600, 1200, 2400, 4800, or
9600
baud.
9600 BAUD
5 Save the change and exit the menu.
The baud rate selection is stored in
non-volatile
memory, and
does not
change when power has been off or after a remote interface reset.
∨
< <
Shift <
On/Off
Auto/Man
ENTER
∨
> >
4
Chapter 4 Remote Interface Reference
To Set the Baud Rate
163
Summary of Contents for 34401A
