manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 219 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 219

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

207

System

Start > Settings > Control Panel > System

Use these Thor VM3 panels to:

•

Review System and mobile device data and revision levels. 

•

Adjust Storage and Program memory settings. 

•

Assign a device name and device descriptor. 

Factory Default Settings

General

System: This screen is presented for information only. The System parameters cannot 
be changed by the user. 

Computer: The processor type is listed. The type cannot be changed by the user. Total 
computer memory and the identification of the registered user is listed and cannot be 
changed by the user. 

Memory sizes given do not include memory used up by the operating system. For exam-
ple, a system with 128 MB may only report 99 MB memory, since 29 MB is used by the 
operating system. This is actual DRAM memory, and does not include internal flash 
used for storage.

General

No user interaction

Memory

1/4 storage, 3/4 program memory

Device Name

Unique to equipment type

Device Description

Unique to equipment type

Copyrights

No user interaction

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments