Honeywell Thor VM3 User Manual Download Page 167

Page: 167 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

155

5. Select the desired printer from the list and tap the Set button.

6. If this is the first time a printer is connected, it may take 40-45 seconds for the driver

to install.

7. If no error message is displayed, the printer is ready. If an error message is

displayed, the timeout may have happened before the driver installation has
completed.

To continue after this error:

•

Dismiss the error.

•

Return to the Bluetooth Printing control panel and repeat the process starting
with step 3.

8. The Bluetooth printer is shown. Print a test page if desired.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Search results

Summary of Contents for Thor VM3

Reviews:

Honeywell Thor VM3, User Manual, Page: 167 / 378

Search results

Summary of Contents for Thor VM3

Reviews: