manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 190 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 190

178

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Mixer

Start > Settings > Control Panel > Mixer

The Thor VM3 has two speakers (located at the bottom front of the unit) and one micro-
phone (located at the top front of the unit).

Use the settings on these panels to adjust the master volume, record gain and sidetone.

Factory Default Settings

Output Panel

Tap and hold the Master Volume slider and move either left or right, or tap the left and 
right arrows, to adjust Speaker volume decibel level.

Tap the Test button to play a sample sound at the selected volume.

Input Panel

Output 

Master Volume

- dB

Input 

Record Gain

0.0 dB

Sidetone

Disabled

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments