manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 142 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 142

130

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Replace Front Panel

Front Panel Options

The front panel of the Thor VM3 is field replaceable. The front panel assembly contains 
the keypad, touch screen and optional defroster. Should any of these components fail, 
the front panel assembly can easily be replaced to reduce downtime. The replacement 
front panel is available in these configurations:

•

Standard temperature with resistive touch screen

•

Cold storage with resistive touch screen

•

Outdoor with resistive touch screen

Note:

The Thor VM3 with Microsoft Windows Embedded Compact operating system does not 
support PCAP touch screens.

Equipment Required

The following equipment is user-supplied:

•

Torquing tool capable of measuring inch pounds

•

#2 Phillips screwdriver bit

Replacement Procedure

1. Place the Thor VM3 on a clean, well-lit 

surface before performing the front panel 
replacement.

2. Place the Thor VM3 in Suspend by 

pressing the Power button.

3. Remove the Thor VM3 from the dock.

4.

Disconnect UPS Battery

.

5. Loosen the sixteen (16) captive M3 

screws holding the front panel. Use a #2 
Phillips bit.

Caution:  Before replacing the Thor VM3 front panel, 

Disconnect UPS 

Battery

.

14

16

11

1

7

9

5

4

3

6

10

8

2

12

15

13

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments