72
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Step 2 - Remove RAM Ball
If the Thor VM3 dock has a RAM ball attached, the RAM ball must be removed from the
dock to use the U Bracket mount.
Remove the RAM ball. The hardware used to attach the RAM ball to the dock is not
reused for the U bracket mount.
Step 3 - Attach Adapter Bracket
Note:
For the steps below, always place the lock washer on the bolt before the flat washer.
1. Attach the Adapter Bracket to the Thor VM3 dock using four each M5x16mm bolt,
M5 lock washer and M5 flat washer. Torque to 35 in/lbs (4.0 N/m).
2. Attach the Thor VM3/Adapter Bracket assembly to the U Bracket using 4 each 1/4-
20x5/8 bolt, 1/4 lock washer and 1/4 flat washer.
3. If the Thor VM3 is not already mounted to the dock,
4. Adjust the Thor VM3 to the desired viewing angle.
5. Torque the 14-20 bolts to 50 in/lbs (5.6 N/m).
Summary of Contents for Thor VM3
