manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 216 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 216

204

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Screen Control

Start > Settings > Control Panel > Screen Control

Set screen properties for the Thor VM3.

Factory Default Settings

Note:

If Automatic Brightness Control is enabled for an outdoor display, the value for LCD 
Brightness depends on the Ambient Light %. Otherwise, the display defaults to 100% 
brightness.

Note:

There is no default value for Ambient Light % as it varies depending on the level of light 
where the Thor VM3 is located. If the Thor VM3 has an indoor display it does not have an 
ambient light sensor and the Ambient Light % is always 0.

Note:

Touch screen defroster controls are located on the 

Peripherals

 control panel.

Current Level

LCD brightness displays the current LCD brightness level. The default brightness is 
100%.

Current Level

LCD Brightness (%)

100 (see note)

Ambient Light (%)

(see note)

Automatic Brightness Control

Automatic brightness control is only available on a Thor VM3 with 
an outdoor display.

Enable automatic 
brightness control

Disabled

Low to medium light level 
(%)

25

Medium to high light level 
(%)

75

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments