manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 31 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 31

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

19

Top View - Enhanced Dock

Only the Enhanced Dock has these connectors on the top. The connectors are located 
behind water tight plugs.

Backlights and Indicators

Display Backlight

There are several configuration options for the Thor VM3 display backlight:

Power Management

The display backlight is controlled by power management. When the user activity timer 
expires, the display backlight is turned off. Timeouts can be set for the available power 
management schemes.

See 

Power

 for configuration options.

Backlight Brightness

The intensity of the display backlight can be manually configured:

1. Press the 

Blue

 key to enter Blue mode

2. Press the 

P5

 key to increase backlight brightness or the 

P6

 key to decrease 

backlight brightness.

3. Press the 

Blue

 key to exit Blue mode.

Refer to the 

Screen Control

 panel for the current display brightness level.

Screen Blanking

The Thor VM3 can be configured to blank (blackout) the display while the vehicle is in 
motion.

Refer to 

ZoomZone

 for information.

USB Host               Ethernet

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments